Indiana Cleanup Standards for Hydrocarbon Contaminated Soil

Product Parameter/ Constituent Acceptable Methods Detection Level Notification Level Action Level Cleanup Level
Kerosene, Gasoline TPH EPA 8015B (Modified) or 8260B 20mg/kg

any amount

 On-site: ³100mg/kg

Off-site: ³20mg/kg 

On-site: <100mg/kg

Off-site 20mg/kg
Naptha, Diesel TPH Modified EPA 8015B or 8270C 20mg/kg

any amount

 On-site: ³100mg/kg

Off-site: ³20mg/kg

 On-site <100mg/kg

Off-site 20mg/kg
Waste Oil



 

 VOC* and EPA 8021B or 8260B 20mg/kg

any amount

site specific

site specific
SVOC and EPA 8270C 20mg/kg

any amount

site specific

site specific
TPH and EPA 418.1 20mg/kg

any amount

site specific

 On-site: <100mg/kg

Off-site: 20mg/kg
PCB EPA 8082 1mg/kg

any amount

site specific

site specific
Metals** appropriate SW-846 method set by the appropriate method

any amount

site specific

site specific

* This analysis also should include Methyl-tert-Butylether (MTBE).

** Metal scans must include: Barium, Cadmium, Chromium (total), Lead, Mercury, Nickel, and Zinc.

Note: For Waste Oil, first run TPH and if TPH >100mg/kg, run other listed parameters.

Risk integrated system of closure(RISC) information can be found on the IDEM website as of 2/15/02.

Contact: Jeff Turley, Indiana Department of Environmental Management, 317-234-0975

E-mail: jturley@idem.state.in.us

Website: www.state.in.us/idem/olq



Top

Design and hosting by Dot.Inc Solutions
 
Copyright © 2000 The Association for the Environmental Health of Soils
150 Fearing Street · Amherst, MA 01002
Phone: 413.549.5170
Fax: 413.549.0579
E-mail: info@aehs.com