|
|
||||||||||||||||||||||||||||||||||||||||||||
| Minnesota
Cleanup Standards for Hydrocarbon Contaminated Soil
* All samples, unless specifically noted, should use an EPA approved method or equivalent. ** Soil Vapor headspace analysis ³40ppm. *** Visual evidence of contamination or soil vapor headspace ³10ppm. **** For a sandy site, an additional investigation is needed if: 1) field PID screening levels in the remaining soil is greater than 40 ppm for a gasoline release, or greater than 10 ppm or visible contamination for a diesel or fuel oil release; or 2) the analytical result of the excavation base or sidewall soil sample is greater 50 mg/kg GRO/DRO; or 3) the analytical result of the excavation base or sidewall soil sample is less than 50 mg/kg GRO/DRO but ground water is within 25 feet of the surface. For a silt or clay site, an additional investigation is needed if: 1) field PID screening levels in the remaining soil is greater than 40 ppm for a gasoline release, or greater than 10 ppm or visible contamination for a diesel or fuel oil release; or 2) the analytical result of the excavation base or sidewall soil sample is greater 100 mg/kg GRO/DRO. Contact: Chai Insook, Minnesota Pollution Control Agency, 651-296-7718 E-mail: chai.insook@pca.state.mn.us Web Site: http://www.pca.state.mn.us/cleanup/pubs/lustpubs.html
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||
|
Design and hosting by
Dot.Inc Solutions |