Indiana Cleanup Standards for Hydrocarbon Contaminated Soil

 Product

Parameter/ Constituent

Acceptable Methods

Detection Level

Notification Level

Action Level

Cleanup Level

Kerosene, Gasoline

TPH

EPA 8015B (Modified) or 8260B

20mg/kg

any amount

On-site: ³100mg/kg

Off-site: ³20mg/kg 

On-site: <100mg/kg

Off-site 20mg/kg

Naptha, Diesel

TPH

Modified EPA 8015B or 8270C

20mg/kg

any amount

On-site: ³100mg/kg

Off-site: ³20mg/kg

On-site <100mg/kg

Off-site 20mg/kg

Waste Oil



VOC* and

EPA 8021B or 8260B

20mg/kg

any amount

site specific

site specific

SVOC and

EPA 8270C

20mg/kg

any amount

site specific

site specific

TPH and

EPA 418.1

20mg/kg

any amount

site specific

On-site: <100mg/kg

Off-site: 20mg/kg

PCB

EPA 8082

1mg/kg

any amount

site specific

site specific

Metals**

appropriate SW-846 method

set by the appropriate method

any amount

site specific

site specific

* This analysis also should include Methyl-tert-Butylether (MTBE).

** Metal scans must include: Barium, Cadmium, Chromium (total), Lead, Mercury, Nickel, and Zinc.

Note: For Waste Oil, first run TPH and if TPH >100mg/kg, run other listed parameters.

IDEM is currently developing risk-based corrective action guidance.

Contact: Jeff Turley, Indiana Department of Environmental Management, 317-234-0975

E-mail: jturley@idem.state.in.us



Top

Design and hosting by Web Studio Designs & Pioneer Host Internet Solutions
 
Copyright © 2000 The Association for the Environmental Health of Soils
150 Fearing Street · Amherst, MA 01002
Phone: 413.549.5170
Fax: 413.549.0579
E-mail: info@aehs.com